How to Assemble a Foldable Electric Skateboard

Please follow the following three steps: open the foldable electric skateboard, adjust the skateboard handlebar, check the steering system and skateboard wheels.
Foldable Electric Skateboard

Firstly, open the foldable electric skateboard. Release the lever located at the front left of the pedal at first, then press down the folding latch lever located on the right side of the pedal with one hand, at the same time, lift the handlebar up with your other hand, lock the left lever, and secure the handle.

Secondly, adjust the handlebar. Keep the front wheel in line with the pedal, look down over the handlebar to check whether the hand horizontal tube is perpendicular to the front pedal wheel. If not, use a hex wrench to loosen the two screws at the bottom of the tube, re-adjust the position of the handlebar and tighten the screws. Then check the height of the handlebar, stand with your feet on the floor on either side of the pedal, located in the middle of the pedal, bend your arms slightly, and the handlebar should be at hip level. If the height is not correct, you can adjust the height by opening the brake switch on the top of the direction tube and pressing the spring button, then lock the switch after adjusting the height.

Thirdly, check the steering system and wheels. Check the steering system first, hold the handlebar, and move the front of the electric skateboard back and forth, if there is any looseness between the handlebar and the wheel, you need to tighten the nut at the bottom locking ring of the direction tube, please note that the tightness should be appropriate, too tight will not be able to turn. If there is any looseness between the handlebar and the pedal, please tighten the locking system and the screws below. Next, flip the scooter upside down, check the wheels, secure the scooter, and try to rock the wheels from side to side. If the wheels are shaking a lot, you can tighten the screws on both sides of the wheel with a hexagon wrench. Now that the inspection is complete, let's get ready to hit the road.

For More Message,please check:

Leave a comment

Name .
Message .

Please note, comments must be approved before they are published